It is a product of 100 per cent mineral origin, manufactured and blended from several types of quarry material in accordance with a specific formula and gradation curve, based on a French licence and the DIN 18035-5 standard.
Natural material
100%
A purely mineral raw material sourced from tried-and-tested quarries. Its colour fastness and properties will last for decades.
A unique mineral product for gravel surfaces. The only gravel product in the Czech Republic and Slovakia with clearly defined specifications.
A material free from colourants, binders and stabilisers, and free from clays and limestone components.
Everything you need to know about the composition, maintenance, compaction and transport of the material.
It is a product of 100 per cent mineral origin, manufactured and blended from several types of quarry material in accordance with a specific formula and gradation curve, based on a French licence and the DIN 18035-5 standard.
To maintain a Parkdecor gravel surface, use a light-weight slatted rake to remove organic matter (leaves, twigs, etc.) and other debris; this also serves to renew and regenerate the top layer by a few millimetres. In the event of mechanical damage to the surface, the original material at the repair site is loosened, moistened and simply compacted by pressing down. Under no circumstances should additional material be added to the original compacted area, nor should the surface be vibrated in any way!
One of the key requirements for a gravel surface is guaranteed water permeability as specified by the DIN 18035-5 standard, which Parkdecor gravel meets in all colour variants.
Transport can be arranged using a three-way tipper trailer with a capacity of up to 2.5 tonnes, a container lorry with a capacity of up to 12 tonnes, and, for larger projects, a lorry with a capacity of over 12 tonnes fitted with a tipper semi-trailer.
Brožura k mlatovým povrchům ve formátu PDF.
We will deliver the Parkdecor crushed stone surface to your chosen location on a bed of 0/32 mm crushed gravel.
We lay Parkdecor in a single layer. We level it to the required surface, to a thickness of approximately 5 cm, usually using levelling boards or a rake.
Once levelled to the required plane, Parkdecor should ONLY BE ROLLED. The Parkdecor tamping system must never be vibrated!
Once the Parkdecor has been properly compacted, we then water it. Ideally, this should be done using a spray bottle or a shower head. As soon as water begins to pool slightly on the Parkdecor, we stop watering.
Once levelled to the required plane, Parkdecor should ONLY BE ROLLED. The Parkdecor tamping system must never be vibrated!
Once this period has elapsed, Parkdecor is fully ready for use.
News about projects and Parkdecor® materials.
WAKO Czech Republic Champion. 37 fights with a record of 23 wins, 11 losses and 3 draws. He graduated from the Faculty of Physical Education and Sport at Charles University with a PhDr. degree.
9-time consecutive indoor field hockey champions, 8-time consecutive Czech champions.
Free advice, including supervision during installation.